Skip to Content

Fireplace

Please do not rely only on pictures to decide about choosing a gate. Read all the description for details for more understanding about how the gate works. You can also call and / or send to pictures to Babysecure for help confirming which gate would be the best for your needs.

This Construct a Shape Gate baby safety gate fits wide and unusual shaped areas.

  • Make a straight line or shape it into semicircle, L , U shapes or connect onto itself to be an larger playpen.
  • Use to surround stairs, office desks, gym equipment , divide rooms, or a shape into an L for offset tops of stairs..
  • Doorway within the gate automatically closes and locks. A magnet system pulls the door closed to lock the door section. Doorway will stay open on either side if put at right angles to the gate.
  • Gate can be quickly removed from mounting fixtures, folded on itself and stored. Mounting fixtures are thin plates which will be hardly noticeable if you temporarily want to remove the gate.
  • Door panel is "30" with a 24" wide door opening which you can place anywhere in the gate.
  • Made of heavy duty steel.
  • Can add optional extensions to make as long as you want or use as a freestanding play area.
  • Basic 3 piece Construct a Gate measures 86" long and consists of 1 x Doorway Panel 30", 2 x 24" panels and 2 x 4" Mounting Fixtures. All panel hinge point ends can be articulated to make straight or angled lines. The exception  would be the end Mounting Fixtures which must come out for their installation location at right angles.
  • Measures 31" high.
  • Available in WHITE or BLACK.
  • Add or substitue  9" and 24" extensions for larger openings or to fine tune shape wanted. see extensions below.
SR10n
$259.95
Product

 

 

Please do not rely only on pictures to decide about choosing a gate. Read all the description for details and open installation attachment for more understanding about how the gate works. You can also call and / or send to pictures to Babysecure for help confirming which gate would be the best for your needs.

 

The Kidco AutoClose HearthGate Child Safety Gate helps you babyproof your fireplace or span any wide opening.

  • Use to childproof fireplaces, partition rooms from office desks, gym equipment of any shape or size.
  • Doorway within the gate will automatically lock every time! A magnet system pulls the door closed to lock the door section. Can also be left open if door is pushed to right angles on either side of the the gate.
  • Gate can be easily removed from mounting hardware.
  • Doorway within the 24" panel is 18" which you can place anywhere in the gate. Felt under the bottom bar will help protect your floors or the Gate Mate below not only protects the floor but gives some added stability.
  • Made of heavy duty steel.
  • Measures 31" high.
  • Basic 5 piece gate measures 128" long (fits a basic 6' wide hearth).
  • Gate consists of 5 x 24" panels, 2 x 4" mounting fixtures.
  • If 5 panels is too wide for your needs, look at Configure Gate SR10n which comes in black and white.
  • Can add optional 9" and 24" Extensions for larger areas or to use as a freestanding play area. 
  • Open ATTACHMENT below for details about gate installation.

 

 

 

SR11n
$299.95
Product

These fireplace screens are not longer being manufactured

Take note of the remaining MISCUES below in case they may fit your fireplace insert.

 

This Fireplace Safety Screen unlike the regular screens will not fall over on your child.

The problem of children burning themselves on gas inserts is so great that new regulations for Jan 2015 require all new inserts will be required to come with a protective safety screen. This screen will provide you with that protection if you have an older insert.

The screen also prevents curious children from running fingers along the sharp edges of the vent fins, experimenting with crevices and finding the entrance to the electrical controls (parents often did not know existed) or crawling inside an open box of a traditional wood fireplace. Custom made to your specific measurement, it looks like a regular wire mesh screen but your baby can not pull it down on them.

  • Made by a grandfather in the business of custom fireplace doors and screens, who wanted to protect his grandson.
  • Secures to the metal frame of your electric or gas insert with magnets securely welded to the screen with no risk of small loose magnets coming off for a child to find and put in their mouth.
  • The Magnet fixtures make it difficult for a young child to move or tip the screen over but adults have the strength to be able to pry it away to have easy access.
  • No need to screw anything or make a change to the look of your fireplace.
  • If you do not have metal around your opening of the firebox and the surface framing it is mostly smooth (ie marble) the screen can also come with adhesive metal strips, see picture. Stick these around the opening and secure the screen's magnets to them.
  • Use the fireplace with the baby in the room. The metal mesh will get warm but not enough to burn if they touch.
  • Screen is made of coated chain mesh that provides a greater surface area, making it much cooler than fireplace glass which can reach 400- 600 degrees.
  • The physical properties of the chain link placed a minimum of a recommended 6 inches away, allows for air circulation to dissapate the heat. You can also choose to have your screen made a greater distance out.
  • The manufacturer stands behind the screen with a satisfaction and lifetime warranty on workmanship. 

Note: Not appropriate for open wood burning inserts or fireplaces. The screen itself would get hot. Only appropriate for wood burning inserts that are basically unused with children in the room and if looking to protect them from exploring or falling against hard protruding parts of grates. It is better to gate wood burning fireplaces. See Auto-Closing Hearth Gate 

MISCUES - Following are measurements of screens which are brand new and never used but result from a miscommunication with an order. If any would fit your fireplace follow the same directions as above about sending pictures and full address, so we can confirm the screen would fit and can send your an invoice with shipping costs. 

  1. 30 1/4"W x 34"H $230.00
  2. 23 1/2" W x 24"H  $195.00

contact info@babysecure.ca for more information

 

FPS
$304.95
Product

Add this extension to either size of the Safe Edge Kits or use when you do not have corners to the surface you would like to pad.

54" strip.

SCK12P
$33.75
Product

Surround the edge of your raised fireplace hearth with this closed-cell foam padding and protect your little ones from the rough, hard and sharp corners.

  • Closed-cell foam is denser than foam padding normally found in hardware stores and therefore provides more cushioning and is less likely to be picked at or chewed.
  • The pad measures 2.1/4" across the top and 2 1/4" on the drop down.
  • Kit consists of one 48 inch strip and 2 pre-fab corners, 6" x 9".
  • Will fit fireplace ranging up to 60" wide with 9" depth or 66" wide and 6" deep.
  • Can be cut with a bread knife to fit any size in between. 
  • Padding fixes with attached adhesive and will stick to brick, stone, ceramic, or marble.
  • For wider fireplaces see SCK12 SafeEdge - 150" or  use the 54" extension, SCK12P.
  • Choose BROWN, GRAY or BLACK.
SCK16
$49.95
Product

Discounted - Was $69.95

This Hearth Guard provides padding for the sharp edges of fireplaces without using adhesives.

  • Made of non toxic, flame retardant foam, it fixes in place by use of an internal straping system.
  • Fits hearths up to 8 feet long and requires 2 right angle sides for the tension system to work.
  • Padding covers 2 inches over the top and 2 inches down the side.
  • Removes easily and great for places like grandparents homes where the padding does not need to be up all the time.

GRAY only. 

SCK15
$49.50
Product

Surround the edge of your raised fireplace hearth with this closed-cell foam padding and protect your little ones from the rough or hard surfaces and sharp corners.

  • Closed-cell foam is denser than foam padding normally found in hardware stores and therefore provides more cushioning and is less likely to be picked at or chewed.
  • The pad measures 2 1/4" across the top and 2 1/4" on the drop down.
  • Kit consists of three 30 inch strips and 2 pre-fab corners, 20" x 10".
  • Will fit fireplace ranging up to 130 inches wide with 10" depth or 110" wide and 20" deep.
  • Can be cut with a bread knife to fit any size in between. 
  • Padding fixes with attached adhesive and will stick to brick, stone, ceramic, or marble.
  • For smaller fireplaces see SCK16 or to extend width see 54" extension, SCK12P.
  •  BROWN
SCK12
$74.75
Product

This is the most economical kit to cover the sharp edges of a raised hearth.

  • Covers 2 inches over the top and 1 inch down the side.
  • Kit consists of two corners, 4.5" x 10" and one strip 6ft long.
  • Adheres to brick, stone, marble etc. with hook and loop adhesive strips (provided) for strong attachment.
  • For longer length or hearths not needing corners See Edge Cushioning - 6ft SCK9E.
  • Choose BLACK, BROWN (taupe as in picture no longer available).
SCK9
$39.95
Product

This guard clamps to the handles of standard bifold or hinged fireplace doors, which open out from eachother. It keeps children from playing inside or pinching fingers. Two black, sturdy metal bars fasten together, top and bottom over horizontal handles with hex screws and a wrench, provided. For the bars to clamp on the handles need to be a U-shape with hallow centre and extend out from the fireplace door about 1 inch.  Fits handles 5" to 9" apart.

DW16
$21.95
Product